Importance of Using Fire Dampers in Commercial Areas

 The word ‘dampers’ refers to products set up in HVAC ductwork to keep flames from propagating in the ductwork. From a safety point of view, it is essential to stop the occurrence of smoke or fire spreads at commercial buildings. As a Aluminium Technical Engineering Factory Tecnalco -UAE, we know how significant it is to use the product commercially as well.

Installed in HVAC system ducts, automatic fire dampers would automatically shut one or more doors in the damper when a rise in temperature is detected. This will keep smoke or fire from spreading through the ducts to the other areas of the commercial building, which uses this passive fire protection device. The importance of using this product is evident from how it works. Nevertheless, in the capacity of being a Aluminium Technical Engineering Factory Tecnalco , we will take a closer look at this topic.

Reasons to Use Fire Dampers at a Commercial Setting

Active fire protection products such as sprinklers can reduce the speed of spreading fire and help with occupant evacuation. However, those forms of fire protection devices alone cannot keep gases or smoke from spreading. For your information, one of the leading causes of unnatural death in commercial fire occurrences is the act of smoke or gas spreading. Operating passive fire dampers do not require the utilization of electricity. Instead, in the case of an increase in temperature, a thermal element or core would melt to allow for spring-operated damper doors or blades to close. You may want to go for horizontal or vertical damper options, according to how these shut the ducting system. Each damper type suits different applications.

It takes only a few seconds for a tiny flame to just grow and be a major occurrence of fire. Cutting off all the possible passageways where flames can travel will allow containing the situation to a single location. This will help to ensure that a building is fireproof. Being fireproof means that you will have one less thing to worry about even on holidays.

On the other hand, the utilization of motorized smoke fire dampers is to prevent the propagation of smoke through the ventilation system of a building. The dampers are typically situated in the ductwork and work by shutting off at the time of smoke detection. As with a fire occurrence, smoke is also likely to propagate fast through a commercial building. In a fire incident, one of the leading reasons for death is smoke inhalation. It is important to keep smoke inhalation from happening to keep your building occupants safe at the time of evacuation. This is where motorized smoke fire dampers have a big role to play.

Install The Best Fire Dampers Today for Your Commercial Building

Are you planning on building an HVAC or ducting system? If so, be sure to add fire dampers to your plans. When you have any doubt about which damper variety to choose, consider contacting a Aluminium Technical Engineering Factory Tecnalco as well. For instance, we offer high-grade fire and safety products as well as have competent staffers to help you pick the right damper for your building or application.

Posted on 

Sound Attenuator and Commercial Industries: How It Works?

Sound Attenuators Manufacturers in UAE

A sound attenuator is also called a sound trap, duct silencer, or muffler. It is a noise control system of the Heating Ventilating and Air-Conditioning (HVAC) network that is designed for the reduction of noise through the ductwork that gets either from equipment in any building or occupied spaces.

There are different designs and types of HVAC duct silencers and sound attenuators in a system offered by Aluminium technical engineering factory- tecnalco. You may select from a wide range of customized or standard sound attenuator systems for residential or commercial industries that satisfy the needs of the application. The noise caused by HVAC systems becomes too high and the ventilation areas of buildings, enclosures, and equipment rooms become very noisy. The controlling measures include silencers and louvers into the system design that makes the space free from any additive noises. HVAC systems are noisy with the sounds of the electrical and mechanical devices. There are rectangular and circular sound attenuators available for absorbing the sound in the air stream and removing the HVAC noise. The sound produced by HVAC systems is very distractive and the proper installation of sound control systems can ensure the smooth and noise-free working of systems.

Cause of Noise

There are ample reasons for which HVAC systems can become noisy. These systems have an in-built sound absorption technique embedded for keeping the sound low. There are millions of air pockets contained in the Sound Attenuators Manufacturers in UAE. that reduce the noise with the absorption of the passage of acoustic energy. The fans also produce noise with the air vibration and movement of fins. The pressure drop causes the air changes in the system that is a cause of producing the annoying noise. The loose fixing of bolts and nuts even produces a loud noise.

Types of Sound attenuators for HVAC Systems

Cylindrical attenuators: These are fitted in the ducts for silencing the noise from inside. These come with a spinning head with a tail that has the shape of a cone. The circular attenuator has two walls.

Rectangular attenuators: These are fitted over the HVAC system for noise reduction. These include dissipative silencers delivering acoustic energy with sound-absorbing media installed inside them.

In the interior wall of the sound attenuators is the insulation made for reducing the sound to a minimum level. The noise is reduced and the pressure changes in an HVAC system are maintained for making the system flow with ease.

Working of a Sound Attenuator

Sound attenuators are used as an important part of the HVAC system and these are installed to get the best effects for noise cancellation. The Sound attenuators are suggested to be installed by aluminium technical engineering factory-tecnalco, at the time of installation of the HVAC system. The insulation varies in thickness depending on the frequency of the sound produced. Sound attenuation is increased by the enhanced length of the attenuator that controls the HVAC system pressure. Regular maintenance of the system is carried out for reducing the noise and maintaining a check that there are no loose fittings in the maintenance systems.

The silencers are backed by independent testing systems in the laboratory and have applications in the following areas:

  • Commercial, Institutional or Industrial HVAC duct systems
  • Air handling units
  • Cooling towers
  • Fan Inlet and Discharge
Conclusion

Tecnalco Aluminium Technical Engineering is one of the renowned air distribution products manufacturers and suppliers in the UAE. It works for the special designs and ideas for AC systems that meet the international quality standards. They are the oldest and the largest producers of air distribution products with a specialty as sound attenuators manufacturers in UAE. The company offers customer-durable segments, grilles, diffusers, attenuators, fire dampers, jet diffusers, access doors, exhaust valves, volume control dampers, and many other products.

The company is renowned for rendering trusted services by installing products that are manufactured with the best quality material for flawless working. All the products are tested by ITS testing services (Cortland, NY) that are the main standard for air distribution services distribution. The growing need for HVAC machinery in the UAE market has made Technalco a leader in the related products and the futuristic growth of the company is guaranteed with the smooth day-to-day operations for meeting the customer needs well.

Comments

Post a Comment

Popular posts from this blog

Which is better; a humidifier or a diffuser?

  Air distributor system ensures quality air distribution in conditioned spaces. Different types of air distribution system include dampers, coils, fans, filters, ducts etc. Air Distribution helps in HVAC (Heating, Ventilating, and Air Conditioning). Technalco Aluminium Engineering Factory the leading air distribution products manufacturer in UAE have different type of air distributor systems. As per one’s requirement one can choose from a wide array of products. Different types of Dampers The most suitable air distribution system when it comes to buildings like offices and schools are dampers. Dampers are made of plates, blades or valves. They control the flow of air as required. Dampers are an important part in regulating temperature. They even control the spread of poisonous fumes. Fire protection is another integral usage of dampers. Besides maintaining airflow dampers therefore ensures safety. Hence it is very important to have dampers in buildings especially industrial buil...
Read more

Grilles and Registers Repair & Installation in Abu Dhabi

Image
The difference between grilles and registers is that in registers you can adjust the air flow, while in grilles this is not possible. Registers have dampers that can be adjusted. It is important to have adequate grilles and registers for proper ventilation and air circulation. If they are not installed then the indoor air which over time gets polluted and become humid will have no place to move out. Tecnalco Aluminium Technical Engineering Factory, the best  air distribution products manufacturer UAE  has diverse kinds of grilles and registers which can be placed at different kinds of facilities. Top quality grilles and registers are offered by us. While installing grilles and registers there are many things which you have to consider. Different kind of grilles works differently and disperses the air in diverse ways. In order to install standard grade grilles and the suitable type of grilles you have to purchase the grilles from a reputed and trusted  AC grill manufacture...
Read more

Guide to Know Air Diffuser’s Function in Your Home’s HVAC System

  Using a device known as an air diffuser enables you to efficiently spread airflow that has been heated or cooled as it enters a space. Even though all HVAC systems have rectangular or square vent grilles that are fixed in place to cover the hole where the supply air duct enters a room, there is typically no method to modify either the airflow's direction or its volume. Diffusers for the air can be found in a variety of sizes, and they typically disperse air in a pattern that can be controlled and directed. They control the distribution of air within a room, which helps minimise lingering cold or hot patches and maintains a consistent level of conditioned airflow and air quality over the entirety of the space with AC ceiling diffuser manufacturer UAE. The whooshing sound that is sometimes audible as a result of HVAC airflow moving through a typical supply vent can also be muffled by the installation of a diffuser, which serves another purpose in this regard. https://tecnalco.com/g...
Read more